How to Recognize Self-Adhesive Stamps

As you may know from my previous posts, I have been struggling with removing self-adhesive stamps from paper. I finally figured that hot water seems to work the best for me in removing self-adhesive stamps from paper. Having tried my hand at many many Australian stamps, I share with you a way to recognize these self-adhesive stamps on paper so you can be better prepared for them before you soak them in hot water.

Australia releases many variations of stamps. Typically stamps released in miniature sheets seem to be on gum paper, while others are on self-adhesive paper. The perforation of these stamps is an easy way to recognize them.

  • Gum stamps usually have finer perforation (14) while self-adhesive stamps have more spread-out wavy perforation (11 or 11½). 
  • Check the corners of the stamps. Gum stamps have regular corner perforation while self-adhesive stamps have a more rounded corner with missing perforation in the corner.
  • Gum stamps also have pulled effect to perforations, while self-adhesive stamps have neater separation. 

I have noticed the above differences only in Australian stamps. My guess is these might be similar for other countries too like USA, Great Britain etc.

Removing Self-Adhesive Stamps from Paper

I have tried a few ways to remove self-adhesive stamps now, mostly unsuccessful. But I seem to have found a method that actually works.

I tried lighter fluid as explained in one of the videos I listed in my earlier post on removing stamps from paper. I specially bought Zippo lighter fluid but unfortunately this doesn’t work for me. For some reason it seems to make the adhesive stronger and stamps seem to stick stronger to the paper. Maybe it’s just a different kind of lighter fluid than what is required.

Another video said to use Citrus spray. Ambipur room freshner was the closest that I could find to this in India. This surprisingly worked a lot better than the lighter fluid. I spray this on the paper wait a few seconds and the paper comes off. However this method also doesn’t completely remove paper cleanly. Some paper residue will remain on the stamp. Sometimes the paper does come off completely but the layer of glue remains that you have scrape off which is likely to damage the stamp.

What seems to have worked for me is putting stamps in reasonably hot water (not boiling water). Soak the stamps for a few minutes in hot water and the paper is most likely to come out cleanly. In some cases you may still have to scrape residual paper and glue off the stamp, which is likely to damage the stamp. Be careful and use tweezers in this method as the water and the stamps are hot.

Of course, none of the above methods are completely foolproof. So if you have a stamp that you really want and have only one copy of it, I would advise you to just leave it on paper.

In my search, I also found two commercial label and adhesive remover products. I haven’t tried these but if you’ve have any experience with these, then please do share your experience by leaving a comment.

 

Removing Stamps from Paper

I recently asked a question on Facebook: What’s the best way to peel off the paper from the stamps cleanly and completely? Can you share some tips of what works and what doesn’t work? Will the paper simply come off by itself if I am patient enough? Should the stamps be dipped in completely or just float on the water? What about drying stamps, any tips on drying them without curling or sticking to what’s being used to dry them?

I asked this because while sorting my Australian kiloware I figured that new Australian stamps were very hard to take off paper. The old stamps would come off paper after just a few minutes of soaking in water, but these new stamps just wouldn’t budge, refusing to peel off paper easily. In Hindi, we would call them ziddi or dheet (stubborn). It seems many modern stamps, especially from USA, UK, Australia and few other countries are “self-adhesive” stamps, like stickers. I am not surprised that philatelists don’t like these stamps.

Most collectors recommended soaking stamps in lukewarm water and taking them out after some time. Dry them on blotting paper or an old newspaper, and then putting them in or under a heavy book to flatten them completely. It is useful to change water after a few soaks if you have many stamps to soak.

It is best to segregate stamps of colored paper and soak them separately. Colored paper sometimes runs color and is likely to spoil other stamps in the water.

If you don’t want to soak your stamps, you could also use a sponge. Wet the sponge thoroughly and leave your stamp on it, paper side.

Some suggested using a little talc powder to help reduce the stickiness after you remove the paper from self adhesive stamps. However this is debatable as many other collectors indicated that talc is more likely to ruin the stamps than help them.

All the above are good suggestions for most stamps that are not “self-adhesive” stamps. But what about self-adhesive stamps? It seems these require special material to remove from paper. Few videos below help you with methods of removing these self-adhesive stamps. I haven’t tried these methods. However what I have discovered that for self-adhesive stamps, you need to soak them in water for a much longer time. I have managed to peel these stamps off paper after leaving them in water for three to four hours. Even then, there is a possibility that you will damage the stamps, so you have to be very careful. Also after peeling off the paper,  some glue may still remain on the stamp. Simply dip them in water again and wash off the glue gently with your thumb while the stamps is in water.

It is best to try to peel off self-adhesive stamps from paper only if you have duplicates. Else it is best to just leave them on paper with the postmark intact.